Vehicle Maintenance Guide
2024 Jeep Compass
Latitude 4x4 • 2.0L Turbo I4 • 8-speed automatic. Maintenance specs, intervals, and recommended products are organized here for fast service planning.
Drive Type
4x4
Body Style
SUV
Engine
2.0L Turbo I4
Maintenance Spec Table
| Maintenance Item | Capacity | Viscosity / Spec | Interval |
|---|---|---|---|
Engine Oil Engine Oil & Lubrication | 5.00 quarts Capacity shown with filter change. | 0W-20 MS-6395 | Normal: 10,000 mi / 12 mo Severe: 5,000 mi / 6 mo |
Rear Differential Fluid Drivetrain Fluids | Check procedure | 75W-90 API GL-5 gear oil | Normal: 60,000 mi Severe: 30,000 mi |
Transfer Case Fluid Drivetrain Fluids | Check procedure | See spec ATF+4 | Normal: 60,000 mi Severe: 30,000 mi |
Procedure Notes
Engine Oil
Short trips and 4x4 use justify tighter service timing.
Rear Differential Fluid
Procedure guidance to be expanded in the next content pass.
Transfer Case Fluid
Trail use and winter 4x4 duty justify earlier transfer-case service.
Recommended Products
MaxPro Full Synthetic 0W-20
engine oil
Mopar • engine-oil
Why we like it: Factory-style recommendation for a current Jeep crossover drivetrain.
SEVERE GEAR Synthetic EP Gear Lube 75W-90
rear differential fluid
AMSOIL • gear-oil • 75W-90
Fit: Matches the required 75W-90 differential-fluid viscosity and meets API GL-5 differential requirements and API GL-5.
Why we like it: Uses AMSOIL’s severe-duty gear-oil line.
Compatibility: Use in differentials that require API GL-5/MT-1, MIL-PRF-2105E, or MACK GO-J performance.
OE Synthetic Automatic Transmission Fluid Multi-Vehicle
transfer case fluid
AMSOIL • transmission-fluid
Fit: Fits the transfer-case fluid requirement by matching the required ATF+4 specification.
Compatibility: Use in applications that require Allison C-4, TES-389 • Chrysler ATF+4 • Ford MERCON, MERCON V • GM DEXRON II, DEXRON III • Honda/Acura ATF-Z1 • Hyundai/Kia SP-II, SP-III • JWS 3309, 3314, 3317 • Mazda ATF-M III, ATF-MV • Mitsubishi SP-II, SP-III • Nissan Matic-D, Matic-J, Matic-K • Subaru ATF, ATF-HP • Toyota Type T, T-II, T-III, T-IV
Signature Series Synthetic Motor Oil 0W-20
engine oil
AMSOIL • engine-oil • 0W-20
Fit: Matches the factory 0W-20 viscosity requirement and meets the required Chrysler MS-6395 spec.
Why we like it: Uses AMSOIL’s flagship engine-oil family.
Compatibility: Use in vehicles that require API SP (Resource Conserving), ILSAC GF-6A, GM dexos1 Gen 3, Chrysler MS-6395, or Ford WSS-M2C947-A, WSS-M2C947-B1, and WSS-M2C962-A1.
Related Articles
These editorial pages are the first internal-link layer that connects structured vehicle data to the content clusters.